Read this part first: the tub weighs 950kg empty. Filled, with an adult in it, it puts roughly 1,600kg onto about 1.5 square metres of floor — around 1,080 kg/㎡. Residential floors are designed for 200 kg/㎡ of live load. That is not a reason to skip the product, it is the reason this page leads with it, because the answer is different for a ground floor, a concrete-framed apartment and an upper floor in an older timber building.
Ground floor or slab-on-grade: no calculation needed, it goes where you want it. Concrete-framed apartment: normally fine, but place it against or near a beam rather than mid-span, and raise it with your building engineer if there is any doubt. Upper floor in a converted timber building: this needs a structural check before you order, not after delivery. Send us the floor plan and we will tell you honestly which of the three you are in.
Then the delivery path, which stops more tubs than floors do. At 175 × 85 × 60cm it does not go through a standard 80cm door upright, and it does not turn a tight stair corner. Measure the door, the stair width, the turn and the lift — a 950kg piece that cannot reach the bathroom is a very expensive crate.
Four stones, and the price spread is real: Beige and Silver Travertine at the base, Nero Marquina above them, Bianco Statuario Venato at more than double. That gap is scarcity rather than quality — Statuario blocks of this size with even veining are rare and the price follows. All four are carved from a single block, sealed before shipping, and hold heat noticeably longer than acrylic or cast resin, which is the actual reason to buy stone here.
The weight has one upside: nothing moves. No flex underfoot, no creak, no gap opening at the wall over time. Re-seal once a year; stone tolerates bath products but not acid-based limescale removers, which will dull a honed surface within a season.
Specifications
Key Features
- Carved from a single blockFloor, walls, and drain area are one piece of stone. There is no gelcoat, no fiberglass, and no seam to fail.
- 950 kg of solid stoneThe full floor-loading calculation is in the specifications: about 1,080 kg/㎡ with water and one bather, so you can verify it against your slab before ordering.
- Sealed before it shipsThe honed interior is sealed at the factory, so the surface is protected from the very first fill.
- Four stones in one alcove formBianco Statuario Venato, Nero Marquina, Beige Travertine, or Silver Travertine — all carved to the same 175 × 85 × 60 cm footprint.
- Set in place, not assembledThe tub arrives as one piece. Installation is positioning and plumbing, nothing more.
FAQ
- Will a 950 kg stone bathtub overload my floor?
- In most homes, no. The weight spreads across a 175 × 85 cm footprint, giving about 1,080 kg/㎡ once filled with water and occupied. The calculation is printed in the specifications so your contractor can confirm it against your slab.
- Is the tub delivered as one piece?
- Yes. It is carved from a single block and ships as one piece in a reinforced crate — gross weight about 1,150 kg with packaging. There is no on-site assembly.
- Which stone should I choose for a bathtub?
- Travertine feels warm and casual, Bianco Statuario gives the classic white-and-grey look, and Nero Marquina makes the strongest contrast. All four options are sealed and maintained the same way.
- How often does a marble bathtub need resealing?
- About once a year with a stone-safe sealer; on a well-sealed surface water beads up. Daily care is just a soft cloth and a pH-neutral cleaner.
- What is the lead time for a made-to-order tub?
- 8 to 14 weeks from order, covering carving, finishing, sealing, and the pre-shipment photo approval before crating.


























Calacatta Viola 




Reviews
There are no reviews yet.